Board bring-up
Clock, power, memory and peripheral initialisation on new hardware, with problems traced to schematic, layout or silicon errata.
Service · Devices
Commission us to write the firmware and low-level software that runs on your hardware: microcontroller applications, RTOS tasks, device drivers, bootloaders and board bring-up. We work from schematics and datasheets through to firmware that passes your hardware validation.
Hardware-in-the-loop testing
Secure boot and signed images
MISRA-aware C where required
Deliverables
Clock, power, memory and peripheral initialisation on new hardware, with problems traced to schematic, layout or silicon errata.
Application logic on bare metal or an RTOS such as FreeRTOS or Zephyr, with task design, priorities and timing budgets documented.
Drivers for sensors, displays, radios and storage over SPI, I2C, UART, CAN or USB, and Linux kernel drivers where the platform runs embedded Linux.
A bootloader with signed image verification and dual-bank or A/B slots, so a failed update cannot brick a unit.
Host-side unit tests, hardware-in-the-loop tests on real boards and power measurements for battery-powered designs.
Early decisions
Bare metal for simple deterministic loops, an RTOS for concurrent tasks with timing constraints, embedded Linux when networking stacks, filesystems or rich interfaces justify a larger processor.
Flash, RAM, peripherals and power modes checked against firmware needs before the hardware design is frozen.
C or C++ with a standard such as MISRA C for safety-related work, or Rust where toolchain support and team skills allow.
Sleep modes, wake sources and peripheral power gating designed up front, since retrofitting low power is difficult.
Secure boot, debug port lockdown, key storage in a secure element or TrustZone, and how keys are provisioned on the production line.
Engagement
We study schematics, datasheets and product requirements, flagging firmware risks while the hardware can still change.
Early boards are brought up one peripheral at a time, with drivers verified against oscilloscope and logic analyser traces.
Application firmware is built on the drivers, integrated with any companion app or cloud service and run on hardware-in-the-loop rigs.
We support environmental and EMC testing, fix what it uncovers, and supply manufacturing test firmware and provisioning tools.
Fit
Firmware written alongside the hardware catches problems before boards are re-spun.
Code from a departed contractor with no tests or documentation is a candidate for structured rework.
Battery life targets, hard real-time deadlines and safety standards demand specialist embedded work.
Alternatives
If firmware already works and the gap is connectivity, telemetry and fleet management, IoT development fits.
Open registerWhere hardware works and people need an app to control it, start with mobile development.
Open registerPerformance-critical services running on servers rather than microcontrollers suit Rust development.
Open registerPicking a microcontroller without checking firmware needs can leave a product short of RAM or missing a peripheral. We review hardware decisions with the software in mind, so pin assignments, memory and debug access suit what will run there.
A sensor node that reads once a minute and sleeps between needs nothing more than a bare-metal loop. A device juggling radio, display and sensors against deadlines benefits from an RTOS. Embedded Linux earns its power budget only when the product needs its networking and software ecosystem.
Host-based unit tests catch logic errors, but timing, interrupt and peripheral bugs appear only on silicon. Hardware-in-the-loop rigs flash each build onto real boards and drive inputs automatically, catching regressions before they reach a prototype on someone’s desk.
Sooner or later a device in the field loses power mid-update. A bootloader that verifies signatures and keeps a known-good image means an interrupted or malicious update leaves the unit recoverable rather than dead.
FAQ
Common families including STM32, Nordic nRF, ESP32, NXP and Microchip parts, plus embedded Linux on processors from NXP, TI and others. We study datasheets for unfamiliar parts before committing to estimates.
Yes. We start on development boards, then move to your prototypes, with rigs running automated tests on each firmware build.
We follow coding standards such as MISRA C and keep traceability between requirements and tests. Formal certification under IEC 61508 or similar runs through your certification body, and we support that process.
Through a signed bootloader with A/B slots or a fallback image, so a corrupted or interrupted update reverts to the last good firmware.
Related services
Cloud ingestion, device management and over-the-air delivery for connected products.
Open registerOn-device vision models for cameras and edge processors.
Open registerSystem-level test plans that complement firmware unit and rig tests.
Open registerHiring
Primary sources
Dated official documentation, standards, and research that support the factual claims on this page.
How to read this page
Scope, cost and timeline figures are planning guidance until confirmed in a written proposal. Diagrams and screens are illustrations, not client deliverables, and source-code rights and handover follow the signed agreement. See the delivery process and the full disclaimer.
Next decision
Define outcomes, constraints, evidence, rights and handover before delivery begins.
Commercial rights, repositories, environments, documentation, acceptance and handover remain contract-defined.